DOWSIL™ 62 ADDITIVE
Foam control for inks and coatings applications. Based on physical properties, not likely to be an aspiration hazard.
| Product No. | 88293 |
| Supplier | Dow Inc. |
| CAS | 556-67-2, 68131-40-8, 84133-50-6 |
| Synonyms | Dowsil, Additive 62, 62 |
| Applications | Surface Care - Raised Hard Surface Care |
| Characteristics | DOWSILTM 62 Additive is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. DOWSILTM 62 Additive is generally effective at concentrations ranging from 0.5 to 2.0 weight percent, or as low as 0.05 to 0.1 weight percent, based upon total formulation. This additive can be added during the grind or let-down, or can be post-added. Characteristics may vary when used with different systems and formulations. DOWSILTM 62 Additive is compatible with acrylic and polyurethane systems. Thorough preproduction testing is necessary to ensure expected performance. DOWSILTM 62 Additive must be mixed prior to use. |
| Benefits |
|
| Recommended Use |
|
Documents
Product Details
Grade
Technical
Form
Liquid
Prohibited Uses
This product is neither tested nor represented as suitable for medical or pharmaceutical uses. Not intended for human injection. For further information please refer to Dow's product safety page https://www.dow.com/en-us/support/product-safety.html
Appearance
liquid
Boiling Point
> 65 °C (> 149 °F)
California Prop 65
WARNING! This product contains a chemical known to the State of California to cause cancer. (Oxirane, 2-methyl-).
Color
white
Evaporation Rate
< 1
Flash Point
101 °C (214 °F)
Kinematic Viscosity
1900 mm2/s
Odor
slight
pH
7.4
Relative Density
1
Relative Vapor Density
> 1
Thermal Decomposition
> 100 °C (> 212 °F)
Vapor Pressure
24.97 mmHg
Get in touch, 24 hours a day, 7 days a week.
